V1.0.54 (11/29/2023 mm/dd/yyyy)
1. Added support for Core Network
2. Added support for BRC20 token
3. Added support for BTC taproot address
There are two firmware available for your device. They have the same features and functionalities. Please choose to download one based on your preferred language.
How to view my device SN and firmware version?
Important tips you need to know before the upgrade
Upgrade Tutorial For Windows
Upgrade Tutorial For Mac
Upgrade Your SafePal S1 In 3 Simple Steps
Step 1 Download the firmware
On top of this page, subscribe your device SN and download the 'upgrade.bin' firmware to your PC. Please note that the SafePal upgrade doesn't support mobile upgrade for now.
Note: The firmware name could be 'upgrade.bin(1)' or 'upgrade.bin(2)' if you have downloaded the firmware before. Always make sure to rename it as 'upgrade.bin', or else the device might not be able to detect and read it in the next step.
Step 2 Enter upgrade mode
Plug your SafePal S1 into the PC, start the device and enter the upgrade mode. Once the device successfully enters the upgrade mode, there will be a virtual disks poping up on your PC.
Note: Make sure that you manually click 'Enter Upgrade Mode' on the device, so that the device can be recognized as a virtual disk on the computer.
Step 3 Start the upgrade
Drag the 'upgrade.bin' firmware file into the wallet virtual disk, and then click 'Upgrade' on the SafePal S1 device. Then the device will start to upgrade. Wait for 1-3 minutes until it's upgrade. Finally you are good to go!
Note: You don't need to open the firmware file. Simply dragging it into the virtual disk will be ok.
Please charge the device during the upgrade, If the device power is cut, the upgrade may fail and the device could be damaged.